Razor storage

[Sxot]

@Sxot these are very nice how many razors do they hold?

At this stage I don't have them divided up, just razors side by side it holds probably 15.

I plan to set up dividers to keep them from falling over and capacity maybe reduced to 10 at a guess.

 

[Rami]

Perfect. That looks like exactly what I want.

Oh, what are you planning reg dividers?

 

[alfredus]

I have something similar to these - called cuff-link box/case. Works well for DE's, so why not for straights?

 

[SpeedyPC]

Or you can get one at Men's Biz for $160 which is not cheap The handcrafted varnished beech wood box has a removable wooden tray to hold seven straight razors with a blade depth between 4/8" to 7/8".
http://www.mensbiz.com.au/shaving/cases/thiers-issard-seven-razor-display-box.html

 

[Mark1966]

Or you can get one at Men's Biz for $160 which is not cheap The handcrafted varnished beech wood box has a removable wooden tray to hold seven straight razors with a blade depth between 4/8" to 7/8".
http://www.mensbiz.com.au/shaving/cases/thiers-issard-seven-razor-display-box.html

Is Thiers Issard.
Is not cheap.

 

[Substance]

I picked up my box at the local markets modified the tray & wha la my treasure chest is ready to go.
I will add pics later when I can

 

[Sxot]

5 for $30 delivered. http://www.ebay.com.au/itm/182016799381

For dividers at this stage I plan to get some thin timber, hard balsa if I can get it, and just cut it into squares. They would be glued in at each end. Thicker timber for the tang end to give me a thinner gap. Since the box is longer than straights, there would be front to back divider to give me the correct width, and a spot for the desiccant gel packets. I would try and line the whole thing but that might be too hard. I may end up with felt only up the middle between the dividers. Still working over ideas in my head for this.

An example;

 

[Sxot]

The other option is run dividers full length. This would be easier to line.

 

[Havachat45]

My avatar is a photo of my new storage box - I've put about 200 in there and there is still plenty of room - it's bigger on the inside

 

[Substance]

Mine in pics
I only had to slot the tray rail and add some foam to help alignment the str8s